Clearing Staple Jams - Dell 5310n - Workgroup Laser Printer B/W Service Manual

Service manual
Table of Contents

Advertisement

Clearing staple jams

A 28x Stapler Jam message indicates staples are jammed in the stapler. This requires removing the staple
cartridge holder from the printer.
Lift the front edge of the finisher output bin cover until it locks into position.
1.
Remove the print media.
2.
Press the latch to open the stapler access door.
3.
Firmly pull the colored tab to remove the staple cartridge holder from the stapler.
4.
Use the metal tab to lift the staple guard, and then pull out the sheet of staples.
5.
Discard the entire sheet.
Remove any loose staples from the staple guard.
6.
Look through the clear covering on the bottom of the cartridge holder to make sure no staples are jammed
7.
in the entry throat.
Service Manual
3-48

Advertisement

Table of Contents
loading

This manual is also suitable for:

5210n5310n

Table of Contents