Fuser Narrow Media Flag And Spring Removal - Dell 5310n - Workgroup Laser Printer B/W Service Manual

Service manual
Table of Contents

Advertisement

Fuser narrow media flag and spring removal

Remove the fuser narrow media sensor. See
1.
Note the position of the spring (A) in relation to the flag (B).
2.
Carefully ease the right arm (C) of the sensor cover just far enough apart to release the flag and spring.
3.
Spring replacement
Place the spring on the left pin (A).
1.
Set the tang (B) on the flag.
2.
"Fuser narrow media sensor removal" on page
4-35.
Repair information
4-37

Advertisement

Table of Contents
loading

This manual is also suitable for:

5210n5310n

Table of Contents