Removing or installing a memory card
Removal
Remove the system board access cover. (See
1.
Warning: Printer memory cards are easily damaged by static electricity. Touch something metal such as
the printer frame before you touch a memory card.
Push the latches away from the card on both ends of the memory card connector.
2.
The memory card moves out of the connector as the latches open.
Pull the memory card out of the connector.
3.
Avoid touching the connection points along the edge of the card.
Place the card into the original packaging.
4.
If you do not have the original packaging, wrap the card in paper, and store it in a box.
Close both latches.
5.
"Accessing the printer system board" on page
Appendix A—Options and features
A-5.)
A-7