Size Sensing; Panel Menus; Ppds Emulation; Download Emuls - Dell 5310n - Workgroup Laser Printer B/W Service Manual

Service manual
Table of Contents

Advertisement

SIZE SENSING

This setting controls whether the printer automatically registers the size of paper installed in an input source with
size sensing.
Paper source
Tray 1 (integrated)
Multipurpose feeder
250-sheet drawer
500-sheet drawer
2000-sheet drawer
250-sheet duplex
500-sheet duplex
Envelope feeder
When the setting is Auto, every input option equipped with size sensing hardware automatically registers what
size media it contains. When the setting is Off, the media size detected by hardware is ignored. The media size
can be set by the operator panel or the data stream.
To change the size sensing setting:
Select SIZE SENSING from the Configuration menu.
1.
Select Auto or Off, and press
2.
Press Back (

Panel Menus

Settings are Disable and Enable. The default is Enable.

PPDS Emulation

This menu item allows the user to enable or disable PPDS emulation data stream. When this setting is enabled,
the following settings are also changed:
SmartSwitch settings for each port are turned off.
The printer language is changed to PPDS Emulation.
Users can still switch languages on the operator panel and through the PJL data stream.

Download Emuls

Demo Mode

There is a built-in demonstration mode. The settings allow you to Deactivate to turn off the demo mode and
Activate to turn it on. While Demo Mode is set, the printer will start in Demo Mode until you change the setting.
Warning: While Demo Mode is set to Activate, only demonstration files can print, and files received across the
network or from the host computer are ignored.
Size sensing
.
) to exit.
3
3
3
3
Diagnostic aids
3-27

Advertisement

Table of Contents
loading

This manual is also suitable for:

5210n5310n

Table of Contents