Fuser Lamp Removal - Dell 5310n - Workgroup Laser Printer B/W Service Manual

Fuser lamp removal

Remove the fuser assembly. See
1.
Disconnect the fuser lamp AC cable from the right side of the top cover assembly.
2.
Remove the two screws (A) from the right side fuser lamp contact cover.
3.
Warning:
Remove the left lamp contact assembly.
4.
CAUTION: The fuser and the fuser lamp may be hot. You may need to allow them to cool
before handling them.
"Fuser assembly removal" on page
Take care when removing the screw, as the lamp is under spring tension. When the contact is
released, damage to the lamp or contact may occur.
4-27.
A(202)
Repair information
4-33