Developer Drive Coupler Kit Removal; Esd Cover Removal - Dell 5310n - Workgroup Laser Printer B/W Service Manual

Developer drive coupler kit removal

Remove the developer drive. See
1.
Remove the shaft drive and coupler.
2.

ESD cover removal

Open the multipurpose tray, and remove the tray from the two mounting posts. See
1.
feeder/lower front cover assembly removal" on page
Carefully lift the latch on the left (A), and remove the ESD cover.
2.
Note: Be careful not to stress the hinge on the right (B).
Service Manual
4-26
"Developer drive assembly removal" on page
4-16.
4-25.
"Multipurpose