Laser cover removal
Remove the left door. See
1.
Remove the right cover. See
2.
Remove the paper support. See
3.
Remove the redrive cap. See
4.
Press the fuser wiper cover latch, and remove the cover.
5.
Remove the screw (A) at the rear of the printer and the larger screw (B) at the front on the right side.
6.
Remove the two mounting screws (C) from the left side.
7.
Service Manual
4-20
"Left door removal" on page
"Right cover removal" on page
"Paper support removal" on page
"Redrive cap cover removal" on page
A
4-7.
4-9.
4-6.
4-6.