Turning On The Power - HP Visualize B1000 Owner's Manual

NOTE
System Overview
Powering Up Your System

Turning on the Power

1. Turn on the monitor and any external peripherals (for example,
printers) connected to the workstation.
2. Turn on the workstation. The workstation will run a series of
self-tests.
3. After two or three minutes, a series of messages are displayed as
various hardware and software subsystems are activated. Unless
something is wrong with your system, you are not asked to respond to
these messages.
4. A series of windows appears requesting the information you gathered
in the previous section, such as your host name, IP address, and time
zone. Enter the information as it is requested.
You should enter the host name when requested; otherwise, you will get
an error message when you log in.
If you do not have other pieces of information, press
default value. You can provide missing information later by logging into
a terminal emulator window as superuser and executing this command:
/sbin/set_parms
5. You are now asked if you want to set a root password. Specify the
root password now. The root password is the password used for the
superuser account. The superuser is a special user who has
permission to perform all system administration tasks. The user
name for the superuser is root.
6. When you have finished answering all of the questions, the
workstation completes its start-up sequence and displays the CDE
login screen.
44
to use the
Enter
Chapter 1