Error Code Table - Lexmark C935 Service Manual

Error code table

Error code or
message
200.00
Paper jam
200.01
Paper jam
200.02
Paper jam
200.03
Paper jam
201.00
Paper jam
202.00
Paper jam
230.00
Paper jam
231.00
Paper jam
231.01
Paper jam
241.00
Paper Jam
Error contents
Sensor (registration) late jam
Sensor (registration) lag jam
Sensor static jam
Sensor (media on belt) late
jam
Sensor (fuser exit) late jam
Sensor (fuser exit) lag jam
Sensor (duplex wait) late jam
(duplex media feed)
Sensor (registration) late jam
(duplex media feed)
Sensor (registration) late jam
(duplex media feed)
Sensor (tray 1 feed-out) late
jam.
Description/Action
The media is late reaching the sensor (registration)
within the specified time after being fed from any
given media tray.
Go to "200.00 Sensor (registration) late jam" on
page 2-23.
The media reached the sensor (registration) but did
not clear it within the specified time.
Go to "200.01 Sensor (registration) lag jam" on
page 2-24.
Media remains in the areas shown on the operator
panel after power on.
Go to "200.02 Sensor static jam" on page
The media is late reaching the sensor (media on
belt) within the specified time after reaching the
sensor (registration).
Go to "200.03 Sensor (media on belt) late jam"
on page 2-27.
The media is late reaching the sensor (fuser exit)
within the specified time after reaching the sensor
(registration).
Go to "201.00 Sensor (fuser exit) late jam" on
page 2-28.
The media reached the sensor (fuser exit) but did
not clear it within the specified time.
Go to "202.00 Sensor (fuser exit) lag jam" on
page 2-30.
The media is late reaching the sensor (duplex wait)
within the specified time after the duplex media
inverter clutch is turned on.
Go to "230.00 Sensor (duplex wait) late jam
(duplex media feed)" on page
The media is late reaching the sensor (registration)
within the specified time after the duplex drive motor
is turned on.
Go to "231.01 Sensor (registration) late jam
(duplex media feed)" on page
The media is late reaching the sensor (registration)
within the specified time after reaching the sensor
(duplex wait).
Go to "231.01 Sensor (registration) late jam
(duplex media feed)" on page
The media is late reaching the sensor (tray 1 feed-
out) within the specified time after the tray 1 media
feed lift motor is turned on.
Go to "241.00 Sensor (tray 1 feed-out) late jam"
on page 2-37.
Diagnostic information
5057-XXX
Previous
Go Back
2-26.
2-31.
2-35.
2-35.
2-3
Next