Chapter 5 Wave Inline Network Adapter; Inline Network Adapter Description - Cisco WAVE-574-K9 - Wide Area Virtualization Engine 574 Hardware Installation Manual

Inline Network Adapter Description

OL-17738-01
WAVE Inline Network Adapter
This chapter describes the Cisco WAVE inline network adapter and contains the
following sections:
• Inline Network Adapter Description, page 5-1
Ports and LED Indicators, page 5-3
•
Inline Network Adapter Cabling Requirements, page 5-4
•
Installation Scenarios and Cabling Examples for Fast Ethernet Connections,
•
page 5-8
For information on installing an inline adapter in your WAVE-574, see the
"Installing a Cisco WAVE Inline Adapter" section on page
For adapter specifications, see
The WAVE appliance supports one optional 2-port Gigabit Ethernet inline
network adapter or one optional 4-port Gigabit Ethernet inline network adapter.
The inline network adapter is a full-height, three-quarter-length PCI Express
network interface card that contains two or four independent Gigabit Ethernet
ports. (See Figure 5-1.)
Cisco Wide Area Virtualization Engine 574 Hardware Installation Guide
C H A P T E R
Table A-2 in Appendix A.
5
4-3.
5-1