Cisco WAVE-574-K9 - Wide Area Virtualization Engine 574 Hardware Installation Manual page 24

Hardware Features
Table 1-1 Front Panel LEDs (continued)
LED
4
NIC 1 link/activity
LED
5
NIC 2 link/activity
LED
6 Drive activity LED
7
Power On/Standby
button and system
power LED
Cisco Wide Area Virtualization Engine 574 Hardware Installation Guide
1-4
Chapter 1
Color State
Green On
Green Flashing
— Off
Green On
Green Flashing
— Off
Green On
Amber On
— Off
Green On
Amber On
— Off
Introducing the Cisco Wide Area Virtualization Engine 574
Description
Network link exists.
Network link and activity exist.
No network link exists.
If power is off, the front panel LED is not
active. View the LEDs on the RJ-45
connector.
Network link exists.
Network link and activity exist.
No network link exists.
If power is off, the front panel LED is not
active. View the LEDs on the RJ-45
connector.
Drive activity is normal.
Drive failure has occurred.
No drive activity exists.
System is on.
System is shut down, but power is still
applied.
Power cord is not attached or power supply
failure has occurred.
OL-17738-01