Safety Guidelines - Cisco WAVE-574-K9 - Wide Area Virtualization Engine 574 Hardware Installation Manual

Chapter 2 Preparing to Install the WAVE-574
Caution
Caution

Safety Guidelines

OL-17738-01
To reduce the risk of electric shock or damage to the equipment:
- Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
- Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.
- Unplug the power cord from the power supply to disconnect power to the
equipment.
- Do not route the power cord where it can be walked on or pinched by items
placed against it. Pay particular attention to the plug, electrical outlet, and the
point where the cord extends from the WAVE appliance.
To reduce the risk of personal injury or damage to the equipment:
- Observe local occupation health and safety requirements and guidelines for
manual handling.
- Obtain adequate assistance to lift and stabilize the chassis during installation or
removal. The WAVE appliance is unstable when not fastened to the rails. When
mounting the WAVE appliance in a rack, remove the power supplies and any other
removable module to reduce the overall weight of the product.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the
equipment, observe the precautions in this section.
This section contains the following topics:
General Precautions, page 2-4
•
System Reliability Considerations, page 2-5
•
Working Inside the WAVE-574 with the Power On, page 2-6
•
Protecting Against Electrostatic Discharge, page 2-6
•
Cisco Wide Area Virtualization Engine 574 Hardware Installation Guide
Safety Guidelines
2-3