Snmpv3 Notify Table Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

The following table describes the SNMPv3 Target Parameters Table Configuration Menu options.
Table 92 SNMPv3 Target Parameters Table Configuration Menu options
Command
name <1-32
characters>
mpmodel
snmpv1|snmpv2c|snmp
v3
model
usm|snmpv1|snmpv2
uname <1-32
characters>
level
noAuthNoPriv|authNo
Priv|authPriv
del
cur

SNMPv3 Notify Table configuration

Command: /cfg/sys/ssnmp/snmpv3/notify
[SNMPv3 snmpNotifyTable 1
name
tag
del
cur
SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system for particular events
or conditions, and generates Notification-Class messages based on these events or conditions.
The following table describes the SNMPv3 Notify Table Configuration menu options.
Table 93 SNMPv3 Notify Table Configuration Menu options
Command
name <1-32
characters>
tag <1-255
characters>
del
cur
Description
Configures the locally arbitrary, but unique identifier that is associated with this entry.
Configures the message processing model that is used to generate SNMP messages.
Selects the security model to be used when generating the SNMP messages.
Defines the name that identifies the user in the USM table, on whose behalf the SNMP
messages are generated using this entry.
Selects the level of security to be used when generating the SNMP messages using this entry.
The level means that the SNMP message will be sent without authen-
noAuthNoPriv
tication and without using a privacy protocol. The level
message will be sent with authentication but without using a privacy protocol. The
means that the SNMP message will be sent both with authentication and using a
authPriv
privacy protocol.
Deletes the
targetParamsTable
Displays the current
targetParamsTable
Menu]
- Set notify name
- Set notify tag
- Delete notifyTable entry
- Display current notifyTable configuration
Description
Defines a locally arbitrary but unique identifier associated with this SNMP notify entry.
Defines a tag of 255 characters maximum that contains a tag value which is used to select
entries in the Target Address Table. Any entry in the
matches the value of this tag, is selected.
Deletes the notify table entry.
Displays the current notify table configuration.
authNoPriv
entry.
configuration.
snmpTargetAddrTable
means that the SNMP
, that
Configuration Menu 103