Snmpv3 Group Configuration; Snmpv3 Community Table Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Manual

Table 85 View-based Access Control Configuration commands
Command
snmp-server access <1-32
notify-view <1-32 characters>
no snmp-server access <1-32>
show snmp-server access
<1-32>

SNMPv3 Group configuration

The following table describes the SNMPv3 Group Configuration commands.
Table 86 SNMPv3 Group Configuration commands
Command
snmp-server group <1-16>
security {usm|snmpv1|snmpv2}
snmp-server group <1-16>
user-name <1-32 characters>
snmp-server group <1-16
group-name <1-32 characters>
no snmp-server group <1-16>
show snmp-server group <1-16>

SNMPv3 Community Table configuration

These commands are used for configuring the community table entry. The configured entry is stored in the community
table list in the SNMP engine. This table is used to configure community strings in the Local Configuration Datastore
(LCD) of SNMP engine.
The following table describes the SNMPv3 Community Table Configuration commands.
Table 87 SNMPv3 Community Table Configuration commands
Command
snmp-server community <1-16>
index <1-32 characters>
snmp-server community <1-16>
name <1-32 characters>
snmp-server community <1-16>
user-name <1-32 characters>
snmp-server community <1-16>
tag <1-255 characters>
no snmp-server community
<1-16>
show snmp-server community
<1-16>
Description
Defines a 32 character long notify view name that allows you notify access to
the MIB view.
Command mode: Global configuration
Deletes the View-based Access Control entry.
Command mode: Global configuration
Displays the View-based Access Control configuration.
Command mode: All
Description
Defines the security model.
Command mode: Global configuration
Sets the user name. The user name can have a maximum of 32 characters.
Command mode: Global configuration
The name for the access group. The group name can have a maximum of 32
characters.
Command mode: Global configuration
Deletes the
vacmSecurityToGroup
Command mode: Global configuration
Displays the current
vacmSecurityToGroup
Command mode: All
Description
Configures the unique index value of a row in this table. The index can have
a maximum of 32 characters.
Command mode: Global configuration
Defines the name, up to 32 characters.
Command mode: Global configuration
Defines a readable 32 character string that represents the corresponding
value of an SNMP community name in a security model.
Command mode: Global configuration
Configures a tag of up to 255 characters maximum. This tag specifies a set of
transport endpoints to which a command responder application sends an
SNMP trap.
Command mode: Global configuration
Deletes the community table entry.
Command mode: Global configuration
Displays the community table configuration.
Command mode: All
entry.
configuration.
Configuration Commands 91