NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual page 276

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static
Broadcast
Packets
Received
Packets
Transmitted
Without Error
Transmit Packets
Errors
Collisions
Frames
Time Since
Counters Last
Cleared
If you use the
Packets Received
Without Error
Broadcast
Packets
Received
Packets Received
With Error
Packets
Transmitted
Without Error
16-4
The total number of packets received that were directed to the
broadcast address. Note that this does not include multicast
packets.
Total number of packets transmitted out the interface.
Number of outbound packets that could not be transmitted
because of errors.
Best estimate of the total number of collisions on this Ether-
net segment.
Elapsed time, in days, hours, minutes, and seconds since the
statistics for this port were last cleared.
parameter, the following information appears:
switchport
The total number of packets (including broadcast packets and
multicast packets) received by the processor.
The total number of packets received that were directed to the
broadcast address. Note that this does not include multicast
packets.
The number of inbound packets that contained errors prevent-
ing them from being deliverable to a higher-layer protocol.
Total number of packets transmitted out the interface.
v1.0, November 2007
System Maintenance Commands