NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual page 31

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static
Table 2-5. CLI Command Modes (continued)
Command Mode
Policy Class Config
Class Map Config
MAC Access-list
Config
DHCP Pool Config
Table 2-6 explains how to enter or exit each command mode.
Table 2-6. CLI Mode Access and Exit
Command Mode
User EXEC
Privileged EXEC
Global Config
VLAN Config
Interface Config
Line Config
Policy-Map
Config
Policy-Class-Map
Config
Overview
Prompt
Switch (Config policy-class-map)#
Switch (Config class-map)#
Switch (Config mac-access-list)#
Switch (Config dhcp-pool)#
Access Method
This is the first level of access.
From the User EXEC mode, enter
enable.
From the Privileged EXEC mode, enter
configure.
From the Privileged EXEC mode, enter
vlan database.
From the Global Config mode, enter
interface <slot/port>.
From the Global Config mode, enter
lineconfig.
From the Global Config mode, enter
policy-map.
From the Policy Map mode enter
class.
v1.0, November 2007
Mode Description
Consists of class creation,
deletion, and matching
commands. The class match
commands specify Layer 2,
Layer 3, and general match
criteria.
Allows you to access the QoS
Class-Map configuration mode to
configure QoS class maps.
Allows you to create a MAC
Access-List and to enter the
mode containing Mac Access-
List configuration commands.
Allows you to access the DHCP
Pool configuration.
Exit or Access Previous Mode
To exit, enter logout.
To exit to the User EXEC mode, enter
exit or press Ctrl-Z.
To exit to the Privileged EXEC mode,
enter exit, or press Ctrl-Z.
To exit to the Privileged EXEC mode,
enter exit, or press Ctrl-Z.
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Policy Map mode, enter
Privileged
exit. To return to the
EXEC
mode, enter Ctrl-Z.
2-7