NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual page 184

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static
If you use the optional parameter
statistics for the specified port appear.
Port
EAPOL Frames
Received
EAPOL Frames
Transmitted
EAPOL Start
Frames Received
EAPOL Logoff
Frames Received
Last EAPOL
Frame Version
Last EAPOL
Frame Source
EAP Response/Id
Frames Received
EAP Response
Frames Received
EAP Request/Id
Frames
Transmitted
EAP Request
Frames
Transmitted
11-12
[statistics <slot/port>]
The interface whose statistics are displayed.
The number of valid EAPOL frames of any type that have
been received by this authenticator.
The number of EAPOL frames of any type that have been
transmitted by this authenticator.
The number of EAPOL start frames that have been received
by this authenticator.
The number of EAPOL logoff frames that have been received
by this authenticator.
The protocol version number carried in the most recently
received EAPOL frame.
The source MAC address carried in the most recently
received EAPOL frame.
The number of EAP response/identity frames that have been
received by this authenticator.
The number of valid EAP response frames (other than resp/id
frames) that have been received by this authenticator.
The number of EAP request/identity frames that have been
transmitted by this authenticator.
The number of EAP request frames (other than request/iden-
tity frames) that have been transmitted by this authenticator.
Port-Based Access and Authentication Commands
v1.0, November 2007
, the following dot1x