NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual page 242

Layer-2 switches with static routing, software version 7.0
Hide thumbs Also See for GSM7224R - ProSafe Switch:
Table of Contents

Advertisement

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static
ACL ID
Sequence
Number
13-40
Access List name for a MAC access list or the numeric iden-
tifier for an IP access list.
An optional sequence number may be specified to indicate
the order of this access list relative to other access lists
already assigned to this interface and direction. A lower num-
ber indicates higher precedence order. If a sequence number
is already in use for this interface and direction, the specified
access list replaces the currently attached access list using
that sequence number. If the sequence number is not speci-
fied by the user, a sequence number that is one greater than
the highest sequence number currently in use for this inter-
face and direction is used. Valid range is (1 to 4294967295).
v1.0, November 2007
Quality of Service (QoS) Commands

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gsm7248r - prosafe switchProsafe 7200r series

Table of Contents