Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static
13.4.4 conform-color
This command is used to enable color-aware traffic policing and define the conform-color
class map. Used in conjunction with the police command where the fields for the conform
level are specified. The
class map.
Note: This command may only be used after specifying a police command for the
Format
Mode
13.4.5 class
This command creates an instance of a class definition within the specified policy for the
purpose of defining treatment of the traffic class through subsequent policy attribute
statements. The
Note: This command causes the specified policy to create a reference to the class
Note: The CLI mode is changed to Policy-Class-Map Config when this command
Format
Mode
13-20
<class-map-name>
policy-class instance.
conform-color <class-map-name>
Policy-Class-Map Config
is the name of an existing DiffServ class.
<classname>
definition.
is successfully executed.
class <classname>
Policy-Map Config
v1.0, November 2007
parameter is the name of an existing Diffserv
Quality of Service (QoS) Commands