NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual page 283

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static
Protocol
Statistics
System Maintenance Commands
Multiple Collision Frames - A count of the number of suc-
cessfully transmitted frames on a particular interface for
which transmission is inhibited by more than one collision.
Excessive Collisions - A count of frames for which transmis-
sion on a particular interface fails due to excessive collisions.
Port Membership - The number of frames discarded on
egress for this port due to egress filtering being enabled.
VLAN Viable Discards - The number of frames discarded
on this port when a lookup on a particular VLAN occurs
while that entry in the VLAN table is being modified, or if
the VLAN has not been configured.
BPDU's received - The count of BPDU's (Bridge Protocol
Data Units) received in the spanning tree layer.
BPDU's Transmitted - The count of BPDU's (Bridge Proto-
col Data Units) transmitted from the spanning tree layer.
802.3x Pause Frames Received - A count of MAC Control
frames received on this interface with an opcode indicating
the PAUSE operation. This counter does not increment when
the interface is operating in half-duplex mode.
GVRP PDU's Received - The count of GVRP PDU's
received in the GARP layer.
GVRP PDU's Transmitted - The count of GVRP PDU's
transmitted from the GARP layer.
GVRP Failed Registrations - The number of times
attempted GVRP registrations could not be completed.
GMRP PDU's received - The count of GMRP PDU's
received in the GARP layer.
GMRP PDU's Transmitted - The count of GMRP PDU's
transmitted from the GARP layer.
GMRP Failed Registrations - The number of times
attempted GMRP registrations could not be completed.
STP BPDUs Transmitted - Spanning Tree Protocol Bridge
Protocol Data Units sent
STP BPDUs Received - Spanning Tree Protocol Bridge Pro-
tocol Data Units received
RST BPDUs Transmitted - Rapid Spanning Tree Protocol
Bridge Protocol Data Units sent
v1.0, November 2007
16-11