Addport; Deleteport (Interface Config); Deleteport (Global Config) - NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual

Layer-2 switches with static routing, software version 7.0
Hide thumbs Also See for GSM7224R - ProSafe Switch:
Table of Contents

Advertisement

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static

12.1.1 addport

This command adds one port to the port-channel (LAG). The first interface is a logical slot
and port number of a configured port-channel.
Note: Before adding a port to a port-channel, set the physical mode of the port.
Format
Mode

12.1.2 deleteport (Interface Config)

This command deletes the port from the port-channel (LAG). The interface is a logical slot
and port number of a configured port-channel.
Format
Mode

12.1.3 deleteport (Global Config)

This command deletes all configured ports from the port-channel (LAG). The interface is
a logical slot and port number of a configured port-channel.
Format
Mode
12-2
For more information, see
addport <logical slot/port>
Interface Config
deleteport <logical slot/port>
Interface Config
deleteport {<logical slot/port> | all}
Global Config
v1.0, November 2007
Section 4.1.11 "speed" on page
Port-Channel/LAG (802.3ad) Commands
4-5.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gsm7248r - prosafe switchProsafe 7200r series

Table of Contents