Next-Server; Option - NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static
7.1.13.1 no netbios-node-type
This command removes the NetBIOS node Type.
Format
Mode

7.1.14 next-server

This command configures the next server in the boot process of a DHCP client.
Address is the IP address of the next server in the boot process, which is typically a TFTP
server.
Default
Format
Mode
7.1.14.1 no next-server
This command removes the boot server list.
Format
Mode

7.1.15 option

The command configures DHCP Server options. The <
DHCP option code. Ascii string specifies an NVT ASCII character string. ASCII character
strings that contain white space must be delimited by quotation marks. Hex string
specifies hexadecimal data. in hexadecimal character strings is two hexadecimal digits—
each byte can be separated by a period, colon, or white space.
Example:a3:4f:22:0c / a3 4f 22 0c / a34f.220c.9fed
Default
Format
Mode
7-8
no netbios-node-type
DHCP Pool Config
inbound interface helper addresses
next-server <address>
DHCP Pool Config
no next-server
DHCP Pool Config
none
option <code> {ascii string | hex <string1>
[<string2>...<string8>] | ip <address1>
[<address2>...<address8>]}
DHCP Pool Config
v1.0, November 2007
> parameter specifies the
code
DHCP Commands