Bootpdhcprelay Serverip; Show Bootpdhcprelay - NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static

7.4.5 bootpdhcprelay serverip

This command configures the server IP Address for BootP/DHCP Relay on the system.
The < > parameter is an IP address in a 4-digit dotted decimal format.
ipaddr
Default
Format
Mode
7.4.5.1 no bootpdhcprelay serverip
This command configures the default server IP Address for BootP/DHCP Relay on the
system.
Format
Mode

7.4.6 show bootpdhcprelay

This command displays the BootP/DHCP Relay information.
Format
Modes
Maximum Hop
Count
Minimum Wait
Time (Seconds)
Admin Mode
Server IP
Address
Circuit Id Option
Mode
Requests
Received
Requests
Relayed
7-18
0.0.0.0
bootpdhcprelay serverip <ipaddr>
Global Config
no bootpdhcprelay serverip
Global Config
show bootpdhcprelay
Privileged EXEC
User EXEC
Is the maximum allowable relay agent hops.
Is the minimum wait time.
Represents whether relaying of requests is enabled or dis-
abled.
Is the IP Address for the BootP/DHCP Relay server.
Is the DHCP circuit Id option which may be enabled or dis-
abled.
Is the number or requests received.
Is the number of requests relayed.
v1.0, November 2007
DHCP Commands