Using Cli Help - NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static
2.2.6.3 CLI Line-Editing Conventions
Table 2-8 describes the key combinations you can use to edit commands or increase the
speed of command entry. You can access this list from the CLI by entering
User or Privileged EXEC modes.
Table 2-8. CLI Editing Conventions
Key Sequence
DEL or Backspace
Ctrl-A
Ctrl-E
Ctrl-F
Ctrl-B
Ctrl-D
Ctrl-U, X
Ctrl-K
Ctrl-W
Ctrl-T
Ctrl-P
Ctrl-R
Ctrl-N
Ctrl-Y
Ctrl-Q
Ctrl-S
Ctrl-Z
Tab, <SPACE>
Exit
?

2.2.7 Using CLI Help

Enter a question mark (?) at the command prompt to display the commands available in
the current mode.
(switch) >?
enable
help
logout
ping
Overview
Description
Delete previous character
Go to beginning of line
Go to end of line
Go forward one character
Go backward one character
Delete current character
Delete to beginning of line
Delete to end of line
Delete previous word
Transpose previous character
Go to previous line in history buffer
Rewrites or pastes the line
Go to next line in history buffer
Prints last deleted character
Enables serial flow
Disables serial flow
Return to root command prompt
Command-line completion
Go to next lower command prompt
List available commands, keywords, or parameters
Enter into user privilege mode.
Display help for various special keys.
Exit this session. Any unsaved changes are lost.
Send ICMP echo packets to a specified IP address.
v1.0, November 2007
from the
help
2-9