Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static
SNMPv3 Access
Mode
SNMPv3
Authentication
SNMPv3
Encryption
3.7.8 disconnect
This command closes a telnet session.
Format
Mode
3-28
This field displays the SNMPv3 Access Mode. If the value is
set to
the SNMPv3 user is able to set and
ReadWrite,
retrieve parameters on the system. If the value is set to
the SNMPv3 user is only able to retrieve parameter
dOnly,
information. The SNMPv3 access mode may be different
than the CLI and Web access mode.
This field displays the authentication protocol to be used for
the specified login user.
This field displays the encryption protocol to be used for the
specified login user.
disconnect {<sessionID> | all}
Privileged EXEC
v1.0, November 2007
Administrative Access Commands
Rea-