Table of Contents
Advertisement
MAKING EMBROIDERY ADJUSTMENTS
Using the Thread Trimming Function
(Jump Stitch Trim)
The thread trimming function
any excess thread jumps within the color. This function is
initially turned ON. To turn this function OFF, touch
and then
.
*
Your customized setting remains after turning the
machine off and on.
1 Jump stitch
a
Touch
.
b
Touch
to turn off the thread trimming
function.
The key will display as
not trim the thread before moving to the next
stitching.
Selecting the Length Of Jump Stitch Not to
Trim
When the thread trimming function
you can select the length of the jump stitch.
Select a setting from 5 mm to 50 mm in 5 mm increments.
*
Your customized setting remains after turning the
machine off and on.
Touch
or
150
will automatically trim
a
. The machine will
is turned on,
to select the length of jump stitch.
For example: Touch
inch) and the machine will not trim a jump stitch of 25
mm or less before moving to the next stitching.
key
Note
• If design has many trims it is recommended to
select a higher jump stitch trim setting in order to
reduce the amount of excess tails on backside of
fabric.
• The higher number of the jump stitch length
selected, the fewer number of times the machine
will trim. In this case, more jump stitches remain on
the surface of the fabric.
Adjusting the Embroidery Speed
a
Touch
.
The settings screen appears.
b
Touch
.
The embroidery settings screen appears.
c
Display [Max Embroidery Speed] in the embroidery
settings screen.
d
Use
to change the maximum embroidery
speed.
Memo
• SPM is the number of stitches embroidered in one
minute.
• Decrease the embroidery speed when
embroidering on thin, thick, or heavy fabrics and
when using a specialty thread like a metallic thread.
• The setting specified before the main power is set
to OFF remains selected the next time that the
machine is turned ON.
e
Touch
.
to select 25 mm (approx. 1
Advertisement
Table of Contents
