Example Of Modified Program; Resizing Pattern - Brother BAS-761 Instruction Manual

Example of modified program

This section describes the modification method of the program using examples. Refer to "Programming"
(page 58) or "Checking the program setting and setting attribute" (page 69) for function and operation of
each icon.

Resizing pattern

The center point (reference point) of resizing is as follows.
X coordinate: Center of the outer shape of the data
Y coordinate: Uppermost position of the data
Resizing scale between 90 to 110 % are available.
All the settings of attributes become invalid if the pattern is resized without changing the stitch length. Set the
attributes after resizing the pattern.
1
Calling data
1. Press .
P
The work clamp comes down and the programmer screen is
displayed.
2. Select with
3. Select with
4. Input the program number, then press
5. Press .
ESC ESC
Reference point
, then press
, then press
The programmed pattern is resized. The example in
the left is used for explanation.
.
.
.
Programmer
Chapter 2 Programming with Help Function
35