Network Setup Options - Oki ES3640eMFP Configuration Manual

4
4-66 Performing Setup from the Printing Unit Control Panel
Jobs Saved in Printed Queue
1-99 [10]
This option appears only if Enable Printed Queue is set to Yes.
Specify the number of jobs to be stored in the Printed queue. Jobs
in the Printed queue take up space on the Fiery hard disk. If disk
space is low, use a smaller value for saved jobs.
Preview While RIP
Enable/Disable the preview of page thumbnails during RIP on the
command workstation.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the Server Setup;
select No to return to the main Setup menu without making any
changes.

Network Setup options

When you perform Network Setup, you configure the Fiery to
receive print jobs over the network systems used at your site.
In the Setup menu, choose Network Setup, to specify network
addresses and names to be used by workstations, servers, and
the Fiery when they communicate with each other.
The Network Setup menu includes three submenus that allow you
to choose port types, protocols, and network services. You must
perform Port Setup and enable at least one port. When multiple
ports are enabled, print jobs can be received over all of those
ports at the same time. If the Fiery is configured to enable more
than one protocol, it automatically switches to the correct protocol
when it receives a print job.
ES3640e MFP EFI Configuration Guide - 66