Oki ES3640eMFP Configuration Manual page 75

4
4-75 Network Setup options
Network Setup
Protocol Setup
Security Setup
Security Setup options
Use the IP Filtering and IP Port Setup options for Security Setup.
Using IP Filtering options, you can set controlled access to the
Fiery by specifying IP address(es) that the Fiery permits or rejects
receiving. This prevents unlimited access to the Fiery over your
network and ensures network security in your environment.
Using IP Port Setup options, you can close unnecessary ports and
help reject inbound access from the network.
IP Filtering
By default, the Fiery permits all IP addresses. To control access,
you can set an IP address or a range of IP addresses.
Enable IP Filtering
Yes/No [No]
Select Yes to allow the Fiery to enable IP filtering and proceed to
the subsequent IP filtering settings.
Default Policy
Accept/Deny [Accept]
If you selected Yes to enable IP filtering, this option appears.
Select Accept to accept, or Deny to reject, IP addresses other
than the IP addresses you specify at this setup.
ES3640e MFP EFI Configuration Guide - 75