Oki ES3640eMFP Configuration Manual page 170

A
A-170 Troubleshooting
If you see this problem, try the following solutions, in this order:
• A remote workstation running Fiery utilities or Fiery WebTools
may be interfering by obtaining status information. If possible,
close the remote application, and try to connect again.
• Restart the Command WorkStation or Command WorkStation LE
software and try to connect again.
• Check the configuration of the connection and modify it, if
necessary, or delete the Efinl.ini file and start over with the
process of configuring the connection, as described in Chapter 1
of the User Software Installation Guide.
• Restart the Fiery.
For information on other error conditions, see the Job
Management Guide.
ES3640e MFP EFI Configuration Guide - 170