Stages Of Installation On The Network - Oki ES3640eMFP Configuration Manual

1

1-15 Stages of installation on the network

Stages of installation on the network
Installation can be performed by a network or printing
administrator. The stages of a successful installation are:
• Physically connecting the Fiery to a functioning network
Prepare a network node for the Fiery—obtain cable, route it to the
location where the printer will be installed, and attach the cable to
the network interface. For details, see
• Configuring the network server
When network servers are required, you need to configure those
servers to provide client access to the Fiery as a PostScript printer.
For information on configuring network servers in Windows and
UNIX network environments, see
• Setting up the Fiery
Configure the Fiery for your particular printing and network
environment. First read
chapters for details.
• Preparing client workstations for printing
Install the files needed for printing, install additional user
software, and connect the client to the Fiery over the network.
These steps are described in the User Software Installation Guide,
and some information is also provided in
• Administering the Fiery
Monitor and maintain system performance and troubleshoot
problems that arise. For details, see
the Job Management Guide.
ES3640e MFP EFI Configuration Guide - 15
page 3-58.
Chapter 2.
Chapter 2, and then see subsequent
Chapter
Chapter 7
2.
of this manual and