Setup Option Reference; Setup Options - Oki CX3641 Setup Manual

S
ETUP OPTION REFERENCE

Setup options

Option
Allow Courier
Substitution
Append CR to LF
Black Overprint
S
ETUP OPTION REFERENCE
This chapter describes the default settings that you can set for the following groups of
Setup options:
• PS (PostScript) Setup
• PCL Setup
• Color Setup
Depending on the Setup method that you use (WebTools Configure or copier/printer touch
panel), not all options are available. For more information about print options, see
Options.
To determine the current Setup defaults, print the Configuration page from Command
WorkStation.
Settings
(default is underlined)
Yes, No
Yes, No
Off, Text, Text/Graphics
Description
Specify whether to substitute Courier for fonts that are unavailable
when you download files to the CX3641MFP, or when you print a
document for which you do not have the corresponding printer font. If
this option is set to No, jobs with fonts that are unavailable on the
CX3641MFP hard disk generate a PostScript error and do not print.
This setting does not apply to PDF files; font substitution occurs
automatically in PDF files.
Specify whether to append a carriage return to each line feed.
With this option set to Text or Text/Graphics, the final text or text/
graphic portions of the page are overprinted, or combined with the
underlying colors. The quality of the output is improved since it will
not show artifacts near the edges of the text or text/graphics.
With this option set to Off, the border of the text or text/graphics is on
an edge that has cyan and magenta toners on one side (outside the
text) and black toner on the other side (inside the text).
22
Print