Fiery On A Netware Network - Oki ES3640eMFP Configuration Manual

2
2-34 Setting up Network Servers

Fiery on a NetWare network

The NetWise
network operating environments:
• NetWare—NDS (Novell Directory Services)
• Servers running NetWare in bindery emulation mode
The term "Netware" is used to refer to Netware 4.x, 5.x, and 6.x.
Note:
presence and active cooperation of the Novell network
administrator. You must have administrator privileges on the
network to create new NDS or bindery objects.
Note:
supported.
The term "bindery server" is used to refer to a Novell file server
running NetWare in emulation mode. The term "NDS" is used to
describe components of a NetWare operating system running
NetWare in native mode.
NetWare clients print to the Fiery through the Novell network
server. Server setup and client network setup are outlined in this
chapter, client printing setup is described in the User Software
Installation Guide, and printing is described in the Printing Guide.
The Fiery can receive print jobs from NetWare clients over
Ethernet network topologies. During Fiery Setup, you select the
frame type or types that will be used for communication between
the Fiery and network servers. Frame type refers to the format of
a communications packet; frame types are specified in a startup
file when the NetWare server (or any other workstation) loads its
network drivers.
ES3640e MFP EFI Configuration Guide - 34
features built into the Fiery support the following
™
Setting up a NetWare environment correctly requires the
The iPrint feature available with NetWare 6.x is not