Oki ES3640eMFP Configuration Manual page 39

2
2-39 Fiery on a NetWare network
to connect additional NetWare servers, you can do so by using
bindery emulation. You can connect up to eight bindery servers to
the Fiery.
Note:
the one you selected in NDS Setup.
In order to set up the NetWare server in bindery emulation mode
for printing to the Fiery, the network administrator must do the
following:
• Determine the Directory Services path to the container in which
the print server and the print queue for the Fiery will be created.
The container defines the "bindery context" for your network
structure.
• Edit the network startup file to set the bindery context.
• Activate the new bindery context.
Setting up a NetWare print queue for bindery
For NetWare in emulation mode, the NetWare print server and
print queue for the Fiery are created and configured from NetWare
Print Console (PCONSOLE), a NetWare utility that is stored in the
NetWare PUBLIC directory.
As with NDS, you can create several NetWare entities on a Novell
server, and you can then select them in Network Setup.
Setting up NetWare Windows clients for printing
Before setting up client workstations for printing, perform
Network Setup (see
reflect the entities you created in the NetWare administrator
utilities (see
Note:
NetWare server and permit them to connect to the Netware print
server or servers on which you defined a NetWare print queue for
the Fiery.
ES3640e MFP EFI Configuration Guide - 39
The file server you select must not be in the same tree as
page 4-66), and verify that the settings
page 2-36).
For printing to the Fiery, connect all Windows clients to a