4
4-97 Network Setup options
SNMP Write Community Name
[public]
This option appears if you select Yes for Enable SNMP.
This option allows you to change the SNMP Community Name
("public" by default) for write access. Once it is changed, the new
community name must be entered to write any information
through remote Setup. Up to 32 ASCII characters, including
spaces, can be used for the community name.
For the two options above, a space at the beginning or end
Note:
of the name is automatically deleted from the name entered.
When an invalid character is entered or no name is specified, the
default "public" is used for the community name. A name
consisting only of spaces is invalid.
ES3640e MFP EFI Configuration Guide - 97