3
3-56 Preparing for Fiery Setup
The operator controls all job flow, but jobs sent to the Print queue
may not require operator intervention. There is no access to
WebTools.
5. An administrator and an operator; operator controls all jobs; no
WebTool access (Maximum control)
Only an administrator can perform Setup, calibration, and other
administrator functions, and only an operator or administrator can
control jobs from the job management tools. Users can print only
to the Hold queue. The administrator and the operator have
complete control of job flow. There is no access to WebTools.
Use these settings
in Setup
Enable Direct connection
Enable Print queue
Enable Web Services
Set an Administrator
Password (strongly
recommended )
Set an Operator password
ES3640e MFP EFI Configuration Guide - 56
1
2
(Minimu
m)
✔
✔
✔
✔
✔
✔
✔
3
4
(Maximu
m)
✔
✔
✔
✔
✔
✔
✔
✔
5
✔
✔