Important Note About The Remote Printer Name - Oki ES3640eMFP Configuration Manual

2
2-45 Fiery on a network with UNIX workstations
requirements as setting up any printer or new device:
• A distinct IP address is required for the Fiery as well as for each
workstation on the network.
• A name must be selected for the Fiery that goes with the IP
address.
• The IP address of the Fiery must be registered for the network in
a host name database, and also on the Fiery itself.
• At least one print connection (Print or Hold) must be published.
The following information applies especially to the Fiery:
• The Fiery contains a printer controller that understands lpd
protocols.
• The Fiery has a remote printer name you must use in order to
communicate with it successfully.
For details, see the following section.

Important note about the remote printer name

Whichever UNIX system you use, the name used for the remote
printer (or rp in the /etc/printcap file) in configuring the Fiery must
be one of the following :
print
hold
The remote printer name is also used when setting up a
Windows NT 4.0/2000/XP/Server 2003 workstation or
Windows NT 4.0/2000/Server 2003 server to connect to the Fiery
over TCP/IP. Enter the remote printer name when you set up your
Windows NT 4.0/2000/Server 2003 printer, as the "Name of
printer or print queue on that (lpd host) server" in the Add LPR
Compatible Printer dialog box.
ES3640e MFP EFI Configuration Guide - 45