Oki ES3640eMFP Configuration Manual page 84

4
4-84 Performing Setup from the Printing Unit Control Panel
connections have been defined. This makes the search more effi-
cient. Select Entire NDS Tree if the tree is small. Select Specif.
Subtree to restrict the search and specify the subtree.
If you select Entire NDS Tree, pressing Enter returns to PServer
Setup. Proceed with Bindery Setup (see
ing Interval (see
return to the Service Setup menu.
Browse to the root of the Print Queue Subtree.
This message is displayed if you selected Specif. Subtree in the
previous option. Choose Yes to browse the NDS tree to the Print
Queue subtree.
Browsing to find the container object begins with the NDS tree
that you selected previously (with Select NDS Tree). In each sub-
sequent browse screen, the top line represents your current con-
tainer. The second line contains:
• A list of objects directly below your current location
• The symbol ".." to go up one level
• The symbol "." to select the current container object (displayed
in the top line) without traveling down the tree
With an object selected, press Enter to travel down the tree, or
choose ".." to go up the tree. When you select an object and press
Enter, that object is then displayed on the top line, and the second
line lists objects contained within.
When the container that contains print queues is displayed in the
second line, press Enter. In the next screen, choose "." and press
Enter to select the object in the top line.
When the Fiery displays the container name, press Enter to return
to PServer Setup.
Proceed with Bindery Setup (see below), set the Polling Interval
(see page
Service Setup menu when prompted.
ES3640e MFP EFI Configuration Guide - 84
page 4-89), or choose Exit PServer Setup to
4-89), or choose Exit PServer Setup to return to the
page 4-85), set the Poll-