5
5-118 Setting up the Fiery from a Windows Computer
Parallel Port (Port Setup)
—Specify whether you want to print through
Enable Parallel Port
the parallel port. You can connect a single Windows computer to
the parallel port and print directly to the Fiery.
Enabling the parallel port does not conflict with using
Note:
Ethernet communication with the Fiery.
—Available only if Enable Parallel Port is
Ignore EOF Character
selected, this option specifies that the Fiery should ignore
end-of-file (EOF) messages. Select this option to print PostScript
files in binary format (not ASCII); under normal circumstances,
this option should not be selected. When this option is selected,
the Fiery uses the parallel port timeout value to determine when
the end of the file has been reached.
—Available only if Enable Parallel
Parallel Port Timeout (seconds)
Port is selected, this setting determines how long the Fiery waits
without receiving data from the parallel port before deciding that
the current job is complete. Until the timeout, the Fiery cannot
receive new jobs through the parallel port, but it can continue to
receive network print jobs.
ES3640e MFP EFI Configuration Guide - 118