Oki ES3640eMFP Configuration Manual page 79

4
4-79 Network Setup options
Select Frame Types
Enable IPX Auto Frame Type
Yes/No [No]
Specify whether the Fiery should try to bind to all available frame types
automatically. The Fiery does so whether or not all frame types are
appropriate. To determine the frame types that were successfully bound,
save your changes, exit Setup, restart the Fiery, and print a
Configuration page. The Configuration page lists only one of the frame
types that were successfully bound.
If you answer No to this option, you can select frame types manually. You
must choose at least one frame type to enable IPX/SPX protocols.
The frame selection screen allows you to make multiple selections.
Depending on your Port Setup selection, only Ethernet frame types or all
frame types are displayed.
Press [ENTER] for each frame type used on your IPX/SPX network. An
asterisk (*) appears beside each selected frame type. Press the line
selection button again to cancel a selected frame type. Use the up and
down arrow buttons to scroll to additional frame types. The Fiery binds to
each frame type as you select it.
When you have selected all the frame types used, choose Exit IPX/SPX
Setup.
Clear Frame Types
You can clear all frame types at once by choosing Exit IPX/SPX
Setup, choosing IPX/SPX Setup, and then choosing Clear Frame
Types.
ES3640e MFP EFI Configuration Guide - 79