Oki ES3640eMFP Configuration Manual page 76

4
4-76 Performing Setup from the Printing Unit Control Panel
Add Filter
IP Filter Type
IP Address/IP Range [IP Address]
Select IP Address to permit or reject individual IP addresses.
Select IP Range to specify a range of IP addresses to be permitted
or rejected. Up to 16 IP addresses can be specified.
Do not enter "0.0.0.0" or "255.255.255.255".
Note:
Delete Filter
Yes/No [No]
This option allows you to delete IP addresses individually or by
range.
Edit Filter
Yes/No [No]
This option allows you to make changes to IP addresses or a
range of IP addresses to be permitted or rejected.
If you selected Yes to enable IP filtering, these options appear.
Add, delete, and edit filters as required. To add filters, enter the IP
address, IP range, and accept the filter policy.
IP Port Setup. All ports not listed in the following setup options
are closed. Supported protocols are listed in parenthesis after the
port number.
Configure IP Ports
Yes/No [Yes]
Select Yes to proceed to the subsequent IP Port settings.
ES3640e MFP EFI Configuration Guide - 76