Server Setup Options - Oki ES3640eMFP Configuration Manual

4
4-64 Performing Setup from the Printing Unit Control Panel

Server Setup options

The Server Setup menu lets you specify system information that
pertains to the Fiery and all users. To access the menu, follow the
instructions on page 4-62.
When you choose Server Setup, the options appear in sequence,
as follows. Default values, where applicable, appear in square
brackets. Words shown in italics indicate that a product- or
site-specific value is displayed.
Server Name
Default server name
Enter a name for the Fiery (up to 15 characters long). This name
appears in the Chooser on an AppleTalk network.
System Date
Enter the correct system date in the form DD/MM/YY. The date
appears on the Job Log.
System Time
Enter the correct system time. Enter the time based on the
24-hour clock in the form HH:MM (Hours:Minutes). The time
appears on the Job Log.
Time Zone
Specify the correct time zone. Select from a list of major cities
and standard time zones.
Location
Specify where the MFP is located e.g. Office, 4th Floor.
ES3640e MFP EFI Configuration Guide - 64