Oki ES3640eMFP Configuration Manual page 85

4
4-85 Network Setup options
Network Setup
Service Setup
PServer Setup
Bindery Setup options
Bindery Setup
Use Bindery Setup if you have already configured one or more bindery
servers (file servers running NetWare in bindery emulation) with a Print
Server and a Print Queue for Fiery jobs. Before entering bindery settings,
be sure the Fiery is connected to the network and the NetWare file server
is running. If Guest Login is not supported, you need a valid user name
and password.
Note: The terms NetWare server, Novell server, and IPX file server are
in common use and are used here interchangeably to mean the server on
an IPX network running Novell NetWare networking software.
Bindery Setup menu
Because you can set up more than one Novell server to handle Fiery print
jobs, an additional menu is displayed for this purpose. The options are:
• Add File Server—creates a new file server connection to the
Fiery. You can set up a maximum of eight file server
connections. After you have finished adding a new server, you
return to the Bindery Setup menu, where you can set up
another server.
• View Server List—displays the list of file servers that have
already been selected to communicate with the Fiery.
• Edit Connection—lets you change the NetWare Print Server
that will print to the Fiery.
• Remove File Server—lets you disconnect the Fiery from a file
server to which it is currently connected. Remove a file server
when you want to reduce the number of connections to the
Fiery or reassign the connection to a different NetWare
file server.
• Exit Bindery Setup—lets you exit this menu after you have
added all servers, viewed a list of file servers, or removed a
file server from the list.
If you change your mind about any of the menus you have
Note:
selected, use the Menu button to escape and return to the main
Bindery Setup menu. To cancel all changes, exit Network Setup
ES3640e MFP EFI Configuration Guide - 85