Chapter 6: Configuring Fiery Webtools; Configuring The Fiery And Clients For Webtools - Oki ES3640eMFP Configuration Manual

6

6-144 Configuring the Fiery and clients for WebTools

Chapter 6:
Configuring
Fiery
WebTools
To set up WebTools on the Fiery
1. In Fiery Network Setup, enable TCP/IP.
2. Set a valid, unique IP address for the Fiery, and then set the
3. Enable Web Services.
4. In Fiery Printer Setup, confirm that the Print Queue is published.
To set up WebTools on a computer
1. Enable TCP/IP networking.
2. Assign the workstation a valid, unique IP address and subnet
3. Install an Internet browser that supports the Java language and
Fiery WebTools allow you to manage your Fiery remotely from the
Internet or from your company's intranet. The Fiery has its own
home page, from which you can select a variety of functions,
including Status, WebLink and WebDownloader.
For more information on using Fiery WebTools, see the Printing
Guide.
Configuring the Fiery and clients for WebTools
The Fiery WebTools provide access to many Fiery functions via the
Internet (or intranet), providing additional flexibility in remote
management.
subnet mask. Set a gateway address, if required.
mask, and a gateway address if required.
frames.
Make sure Java is enabled. For more information on supported
browsers and Fiery WebTools requirements, see the User Software
Installation Guide.
ES3640e MFP EFI Configuration Guide - 144