Oki ES3640eMFP Configuration Manual page 67

4
4-67 Network Setup options
For this Network or
Connection Type
AppleTalk over
Ethernet
TCP/IP over Ethernet
IPX/SPX over Ethernet
Parallel
To access Network Setup options
1. Confirm that the network cable is connected to the Fiery.
2. Choose Network Setup from the main Setup menu as described on
For each item you enable, you are prompted to enter settings for
that item. Default values, where applicable, appear in this manual
with square brackets.
You should display and select options only for the network
systems that are currently used at your site. If your network
requirements change, you can change Network Setup at any time.
The available network types, and the Setup areas that pertain to
them, are summarized in the following table.
Use this
Port Setup
Ethernet Setup AppleTalk Setup
Ethernet Setup TCP/IP Setup: Ethernet
Setup
Ethernet Setup IPX/SPX Setup
Parallel Port
Setup
During Network Setup, the Fiery queries the network for zones,
servers, and server-based queues. If you perform Network Setup
without a connected and functioning network, default settings are
used that may not meet your needs.
page 4-62.
ES3640e MFP EFI Configuration Guide - 67
Use this Protocol
Setup
—
Use this Service
Setup
AppleTalk printing
(PAP) is enabled
automatically.
LPD Setup
Web Services Setup
Windows Setup
Port 9100 Setup
IPP Setup
PServer Setup (NDS,
Bindery, or both)
—