4
4-78 Performing Setup from the Printing Unit Control Panel
9100-9103 (Port 9100)
Enabled/Disabled [Enabled]
Select Enable to enable the 9100-9103 (Port 9100) ports. (Port
9100 printing)
EFI Ports
Enabled/Disabled [Enabled]
Select Accept to enable EFI ports 8021-8022. (Fiery utilities and
printer driver Two-Way Communication feature)
Oki Ports
Enabled/Disabled [Enabled]
Select Accept to enable Oki ports. (Oki utilities and printer driver
Two-Way Communication feature)
IPX/SPX Setup options
To specify the frame types the Fiery uses for IPX/SPX protocols, choose
IPX/SPX Setup from the Protocol Setup menu. You must choose at
least one frame type to enable IPX/SPX protocols. The Fiery supports
the following frame types for IPX/SPX:
• For Ethernet—Ethernet 802.2, Ethernet 802.3, Ethernet II,
and Ethernet SNAP
For protocols other than IPX/SPX, the frame type is automatically
enabled and does not require setup, as follows:
With this protocol
AppleTalk
TCP/IP with Ethernet
ES3640e MFP EFI Configuration Guide - 78
And these printing
services
PAP (Printer Access
Protocol)
LPD (Line Printer
Daemon)
This frame type is
automatically
enabled
Ethernet SNAP
Ethernet II