Hole Punch Kit
Technician's Installation Guide
1. Unpack the Hole Punch Kit and check the
contents:
[1] Hole Punch Unit
[2] Safety Labels
[3] Screw (for securing hole punch unit to finisher:
see step 14)
[4] Orange Cable (4 leads)
[5] Purple Cable (5 leads)
(P/N 42872902)
2. Remove the packing tape, blue spacers and
any other packing materials from the Hole
Punch Unit.
3. Turn off the printer.
4. On the back of the finisher/inverter unit,
unplug the inverter power cord (
connecting cord (
) and the
1
) to the finisher.
2