Oki ES3640eMFP Configuration Manual page 30

2
2-30 Setting up Network Servers
2003 server
Installing the Fiery as a shared printer
The first step in creating a printer is installing the printer driver
files, which give your applications access to printer features. You
can use the installation instructions in the User Software
Installation Guide for every workstation that will print directly and
independently to the Fiery. However, if you are an administrator
running a Windows NT 4.0/2000/Server 2003 server or
Windows NT 4.0/2000/XP/Server 2003 workstation, you can also
create a printer and share it with clients on the network. This
allows clients who do not have permission to establish an
independent network connection to the Fiery to print through the
server.
You can specify sharing of the printer during installation of the
Fiery printer files. If you have not yet installed the Fiery printer
files on the Windows NT 4.0/2000/Server 2003 print server
computer, do so now, following the instructions in Chapter 1 of the
User Software Installation Guide. During installation, enter the
information necessary to share the Fiery.
If you have already installed the Fiery printer files on the
computer you are using as a Windows NT 4.0/2000/Server 2003
print server, see your Windows documentation for information
about sharing the Fiery.
If more than one Fiery print connection is published (for example,
if both the Print queue and the Hold queue are published), you
may want to create a printer for each print connection, so that
you and other users can print to each connection directly. When
prompted to specify the printer name, enter a name that indicates
the Fiery print connection.
Configuring clients of a Windows NT 4.0/2000/Server
Each client of a Windows NT 4.0/2000/Server 2003 server is
already using a network protocol to communicate with the server.
Each client can print to the Fiery if it has been shared by a
ES3640e MFP EFI Configuration Guide - 30