Oki ES3640eMFP Configuration Manual page 68

4
4-68 Performing Setup from the Printing Unit Control Panel
3. Choose Port Setup from the Network Setup menu.
4. To use Ethernet, choose Ethernet Setup from the Port Setup
menu, and enter the appropriate settings.
5. To print to the parallel port, choose Parallel Port Setup from the
Port Setup menu, and enter the appropriate settings.
6. When you have finished entering port settings, choose Exit Port
Setup, and then choose Protocol Setup.
7. Enter the appropriate settings for the protocol or protocols you
will use.
8. When you have finished entering protocol settings, choose Exit
Protocol Setup, and then choose Service Setup.
9. Enter the appropriate settings for the services you will use.
The options are described in detail in the following section.
To exit Network Setup
1. When you have finished entering service settings, choose Exit
Network Setup.
2. Choose Yes when prompted to save changes.
3. From the main Setup menu, choose another Setup or choose Exit
Setup.
ES3640e MFP EFI Configuration Guide - 68