Oki ES3640eMFP Configuration Manual page 31

2
2-31 Fiery on a TCP/IP network with Windows NT 4.0/2000/XP/Serv-
To connect and print to the Fiery shared
by a Windows NT 4.0/2000/Server 2003 server
•
•
Windows NT 4.0/2000/Server 2003 server
Windows NT 4.0/2000/Server 2003 server, or Windows NT 4.0/
2000/XP/Server 2003 computer. In that case, the client does not
have to use the same network protocol to connect to the
Windows NT 4.0/2000/Server 2003 server as the server uses to
communicate with the Fiery.
Windows 98/Me: Before printing, double-click the
Windows NT 4.0/2000/Server 2003 server icon in the Network
Neighborhood window, and then double-click the printer name.
You are prompted to set up the printer. When you choose to set it
up, the Add Printer Wizard dialog box appears. Follow the
procedures in Chapter 1 of the User Software Installation Guide.
Windows NT 4.0/2000/XP: Before printing, connect to the print
server computer and select the Fiery. Right-click and choose the
Open command.
When prompted, click Yes to have Windows set up the printer.
After clients have selected the printer, they can choose it from the
Print Setup, Page Setup, or Print dialog box of their application.
Clients can change printing options for their own job, but printer
properties appear dimmed, and are unavailable for changing.
When a client chooses Print, the job is transmitted to the
Windows NT 4.0/2000/Server 2003 print server, and from there to
the selected print connection on the Fiery. The job is listed in the
Print Manager on the client workstation, and the administrator can
track it in the Fiery window in the Print Manager on the
Windows NT 4.0/2000/Server 2003 print server.
Configuring Windows computers without a
If your network does not have a Windows NT 4.0/2000/Server
ES3640e MFP EFI Configuration Guide - 31